ILIFE stops working in the middle of cleaning and shows an error. What do the error codes mean and how can I fix them?

If your ILIFE robot vacuum stops during cleaning and shows an error, you need to identify the code and eliminate the cause. Error codes may vary slightly by model (A9, A10, A11, etc.), but most issues relate to brushes, wheels, sensors, or the battery.

Step-by-step actions:

Clean key components.
Remove and clean the side brushes, main roller brush, and front wheel. Hair and debris often trigger error stops.

Check the wheels.
Make sure both wheels spin freely and are not blocked by dirt.

Clean cliff and obstacle sensors.
Dirty bottom sensors can cause false alarms and sudden stops.

Inspect the dustbin and filter.
A full bin or clogged filter may cause overheating and shutdown.

Restart the robot.
Turn it off using the physical switch, wait 1–2 minutes, then turn it back on.

Check the battery.
If it shuts off suddenly, the battery may be worn out.

Look up the specific error code.
Refer to your manual or contact ILIFE support with your model and error details.

If errors persist, share your case on Xolvie.